Once you have purchased and received your new BusyPaws card reader there are a few steps to follow to get it up and running. Before accepting payments, your new card reader must first be digitally assigned to your account. This is done through an authentication process within BusyPaws. Before that, there are also some things to set up on the device itself.
Charge the Reader and Turn It On
Before you are able to configure your card reader you will need to charge it and power it on. Connect the reader to power by plugging the provided USB-C cable into the port on the left side of your reader, connecting the opposite end of the USB-C cable to the provided power adapter, and plugging it into a power outlet
Using alternative power adapters or cables might result in failure modes including inadequate charging, and might invalidate your product warranty.
Once the reader is fully charged, hold down the power button on the right-hand side of the device until the screen turns on.
When the device is powered on, pressing the power button once will sleep or wake the device. To fully power off the device, hold the power button down until the "Power Off" option shows on the screen, then select it.
In a countertop deployment, leaving the device on for extended periods is expected. With a full charge, you can expect the battery to last about fifteen hours. Even when not in use, leave your Stripe Reader S710 plugged in and powered on to receive automatic software updates.
Connect To Your WiFi Network
When you first turn your new device on it should prompt you to connect to your local WiFi network. If the Networking Screen does not display on startup, you can access it through the Settings Menu.
To open the Settings Menu, touch the left edge of the reader screen and swipe right to reveal a "Settings" button. Tap the "Settings" button and enter the admin PIN:
07139
You will then be able to update your WiFi settings or generate a pairing code for device registration. Battery status is also displayed at the top-right of this screen. To close the Settings screen, tap the back arrow in the top-left corner.
Stripe S710 card readers support cellular connectivity in addition to WiFi and ethernet. If desired, businesses may purchase a SIM card and data plan for their reader to allow them to use a data connection in place of a WiFi connection. BusyPaws and Stripe are not responsible for the provision of SIM cards or data plans.
To connect your device, your WiFi network must use WPA-Personal or WPA2-Personal encryption and be password protected. Non-password-protected networks or enterprise networks are not supported. If needed, you can set a static IP on the device from the Wireless Settings screen.
After successfully connecting to your WiFi network, the reader will automatically connect to Stripe and download any available software updates. You will then be ready to authenticate with BusyPaws.
Accounts using the previous model (WisePOS E) can continue to those readers. Note that WisePOS E readers will require that the reader be connected to the same, secure WiFi connection on which the user is accessing BusyPaws. WisePOS E readers cannot be used on data connections.
Authenticate With BusyPaws
When the device connects to the internet a pairing code should display on-screen. If no code is shown, shut the reader down by holding the power button then restart it and re-sync.
With the code in-hand, pull up your BusyPaws account on your computer or mobile device. Click the gear icon near the bottom-left corner of the page.
Select "Card Readers" under Payments.
This page will display a list of the readers you currently have linked to your account. The "Status" column there will have an input field for the pairing code. Enter the code exactly as it is shown on the card reader, then click the "Activate" button.
If desired, use the field in the Friendly Name column to choose a name for your card reader. This is an optional step, but can be valuable for identifying the reader if you have multiple connected to your account. Enter a name into the field and click "Save" to confirm the name.
Once BusyPaws and Stripe authenticate the device, you will be ready to accept payments!
Troubleshooting
When the Stripe S710 card reader is powered on its battery level will be indicated by the colour of its LED indicator light.
Green | Reader is fully charged with the power cable connected. |
Blue (flashing) | Reader is charging. |
Yellow | Reader's battery level is low (10-20% remaining). |
Red | Reader's battery level is critically low (1-9% remaining) or drained (1% remaining). |
Off | Reader is off or the reader is on with the power cable disconnected. |
If you are having trouble using or connecting your reader, the first step is to ensure your card reader is connected to a network that meets Stripe's required criteria. This includes:
Your network must support IPv4 (IPv6-only networks aren’t supported).
The device you are using to access BusyPaws must be assigned a private IP address.
The device you are using to access BusyPaws and your card reader must be connected to the internet and able to connect to Stripe.
Your card reader should not be connected to both an ethernet cable and a WiFi connection at the same time.
WiFi networks must use WPA/WPA2/WPA3-Personal or WPA2/WPA3 EAP-PEAP Enterprise encryption, and must be password protected.






